Features of DMX512 LED Controllers:
1. Our DMX512 LED controllers meet DMX512(1990) protocol and can be used as a DMX512 decoder.
2. Real-time working status of our LED DMX512 controller can be shown through a LCD screen.
3. 33 color changing patterns and 2 DMX operating modes.
4. Our DMX 256 levels brightness; totally 16.77 million colors; thus our controller can satisfy any of your lighting color demand.
5. Maximum 255 speed-adjustment-levels for color-switching.
6. RGB individual dimming function.
7. Parameter-memory function is available in our LED controller.
8. XLR3 Male and Female interface are both equipped.

Part Number	SC-WC8
Fit for	Monochromatic and multicolor LED product
Warranty	3 years

Technical Parameters of DMX512 LED Controllers:
Input Voltage: 12V/24V DC
Input Signal: DMX512(1990)
Output Channel: 12 channels with dimming and 2 channels with dynamic color/speed variation Output Current: 5A/12VDC and 2A/24V DC for each channel
Function: All 35 modes

Dynamic color changing patterns

1. Static Red 2. Static Green 3. Static Blue 4. Static Yellow 5. Static Purple 6. Static Cyan 7. Static White 8. 7-Color Jump 9. 6-Color Jump 10. 7-Color Flick

11. RG Jump 12. RB Jump 13. GB Jump 14. RGB Jump 15. RG Flick 16. RB Flick 17. GB Flick 18. RGB Flick 19. RGB Smooth 20. RG Smooth

21. RB Smooth 22. GB Smooth 23. RGB Gradual 24. RG Gradual 25. RB Gradual 26. GB Gradual 27. R Gradual 28. G Gradual 29. B Gradual 30. R DIM MODE

31. G DIM MODE 32. B DIM MODE 33. RGB mix

Working as a conventional controller (no connection to DMX console)
Color changing modes 1-7 are designed for obtaining static colors. Under these modes, brightness and speed are unchangeable.
Modes 8-33 are designed for obtaining dynamic colors. Brightness and speed levels can be programmed.

How to adjust speed:
Press key "MODE" to 8 to 33.
Step1: Press "SET" to set speed. Change value by "UP" and "DOWN" keys.
Step2: Press "SET" again to exit.

How to adjust brightness (dimming):
Dimming red light:
User can adjust the brightness of Red, and the value will display on LCD screen:
Step1: Press "MODE" to select mode 30
Step2: Press "SET" to set brightness of Red, change value by "UP" "DOWN" keys.
Step3: Press "SET" again to exit.

Dimming green light:
User can adjust the brightness of Green, and the value will display on LCD screen:
Step1: Press "MODE" to select mode 31
Step2: Press "SET" to set brightness of Green, change value by "UP" "DOWN" keys.
Step3: Press "SET" again to exit.

Dimming blue light:
User can adjust the brightness of Blue, and the value will display on LCD screen: Step1: Press "MODE" to select mode 32
Step2: Press "SET" to set brightness of Blue, change value by "UP" "DOWN" keys. Step3: Press "SET" again to exit.

Dimming RGB light:
User can adjust the brightness of R, G, B separately, and the value will display on LCD screen:
Step1: Press "MODE" to select Mode 33
Step2: Press "SET" to set brightness of Red, change value by "UP" "DOWN".
Step3: Press "SET" again to set brightness of Green, change value by "UP"/"DOWN".
Step4: Press "SET" again to set brightness of Blue, change value by "UP"/"DOWN".
Step5: Press "SET" again to exit.

Working with DMX console
Procedure to run dimming function:
Step 1: press "MODE" key to select mode 34. (Make sure the console is connected) Step 2: press "SET" key to set receiving address code by "UP" and "DOWN" keys. Step3: press "SET" to confirm and exit.

Achieve dimming by DMX512 LED controller
In dimming mode, if LED controller is fully connected with 4 groups of RGB products, then the LED controller occupies 12 channels.
1. If the address code is set as X, then the responding channels on console will be CHX, CH(X+1)…… CH(X+11).
CHX dims red lights in Group 1.
CH(X+1) dims green lights in Group 1.
CH(X+2) dims blue lights in Group 1.
CH(X+3) dims red lights in Group 2.
CH(X+4) dims green lights in Group 2.
CH(X+5) dims blue lights in Group 2.

2. To achieve: multiple controllers matched-work with one console and realize synchronous dimming, the address code for each controller should be the same.
For instance, the address code is set as X, then CHX on the console dims Group 1 red light CH(X+1) dims green lights in Group 1.
CH(X+2) dims blue lights in Group 1.
CH(X+3) on the console dims red lights in Group 2.
CH(X+4) dims green lights in Group 2.
CH(X+5) dims blue lights in Group 2.

3. To achieve: multiple controllers work with one console and asynchronous dimming for each controller, the address code for each controller should be set according to channels occupied by products.
For instance, if all controllers are fully connected with RGB products, and controller 1 is set as X, then controller 2 address code should be set as X+12, and controller 3 set as X+24. The rest can be does in the same manner.

Procedure to run dynamic color change function
Step1: press "MODE" key to select mode 35. (Make sure the console has already connected) Step 2: press "SET" key to set receiving address code by "UP" and "DOWN" keys. Step3: press "SET" to confirm and exit.

Achieve dynamic color changing and speed adjustment by DMX512 LED controllers:
1. Individual DMX512 LED controller works with console.
If the address code is set as X, the corresponding channels on console will be CHX and CH(X+1). CHX is for dynamic color changing patterns. CH(X+1) is for speed adjustment. 2. To achieve: multiple controllers work with one console and all controllers have the synchronous dynamic color changing patterns and speed adjustment.
If controller 1 address code is set as X, then the other controllers are also set as X. CHX on console will be responding to dynamic color changing and CH(X+1) responds to speed adjustment.
3. To achieve: multiple controllers work with one console and each controller has different dynamic color changing patterns and speed adjustment.
If controller 1 address code is set as X, then controller 2 will be set as X+2 and controller 3 set as X+4. Accordingly, CHX will respond to dynamic color changing with controller 1, CH(X+1) will respond to speed adjustment with controller 1. CH(X+2) will respond to dynamic color changing with controller 2, CH(X+3) will respond to speed adjustment with controller 2.

Safety Information:
1. Each "channel unit" has a max. load capacity of 180W. If connected with a RGB light, each R, G, B channel can not be loaded with more than 60W. Please make sure that each unit load is less than the max. load capacity; otherwise the DMX512 LED controller may be damaged. DC transformer/adaptor with adequate power is necessary.
2. Our DMX512 LED controllers are designed with constant voltage drive. As a result, users should make sure the controller and running LED lights to have the same voltage, e.g. a 12V DC transformer is needed to power the controller if the LED light is 12V DC, and a 24V DC transformer is needed to power the controller if the LED light is 24V DC.

As a China DMX512 LED controller producer and supplier, Signcomplex provided LED controllers have been extensively used in America, Canada and countries in Europe, the middle-east and so on. In addition to DMX512 LED controllers, we can also manufacture various other LED light bulbs, LED light strips, including LED fluorescent tubes, LED modules, LED pool lights and rigid strips, etc. All of them are CE and RoHS certified. Welcome to choose.